The effects of salinity,temperature and sediment on the toxicity of copper to juvenile Hediste (Nereis) diversicolor (O. F. Muller)

Without sediment, increasing salinity (7.3 to 29.2) and increasing temperature (12 to 22 °C) reduced the toxicity of copper to juvenile Hediste diversicolor. The LC₅₀ values ranged from 357 gL^-1 in 7.3 to 513 g L^-1 in 29.2 at 12°C and from 247 to 500 g L^-1 at 22°C. In deionized water all the juvenile were dead in all solutions to which copper was added (100 to 600 g L^-1). Dead worms were swollen and everted their pharynxs. In higher doses of copper (500 to 600 g L^-1) the worms were abnormal in behaviour in all salinities (0 to 29.2). The ability to swim or crawl was disturbed.With sediments increasing temperature and increasing salinity increased the toxicity of copper to the worms. The LC₅₀ values ranged from 3200 to 4100 g L^-1 at 22°C. The response of the juvenile to copper was antagonistic to increasing temperature and salinity and synergistic to increasing salinity and increasing temperature without and with the sediment respectively.     

Effects of atmospheric ammonia and ammonium sulphate on Douglas fir (Pseudotsuga menziesii)

Three-year-old Douglas firs (Pseudotsuga menziesii) were fumigated with 180 microg m(-3) NH3 or clean (charcoal-filtered) air. During these fumigations the plants received 15 mm artificial rain weekly, supplemented with 20, 500 or 2500 micromol litre(-1) (NH4)2SO4. Exposure to NH3 and NH4+ for 14 weeks resulted in a change of the nutrient status of the needles. The most remarkable effect was the increase in the N/K ratio, due to both uptake of N and leaching of K. The action of NH3 was stronger than that of NH4+. Both NH3 and (NH4)2SO4 affected the epicuticular wax layer and decreased mycorhiza frequency. Following fumigation and artificial rain treatments, needles were incubated for 8 h in a medium containing 0, 50, 250, 500 and 2500 micromol litre(-1) (NH4)2SO4. Almost no exchange of Ca, Mg and K for NH4+ was found. Therefore this ion exchange probably explains only a minor part of the changes in nutrient status of the whole trees.     

Food aid and food crisis in Sub-Saharan Africa: Statistical trends and implications*

This paper documents the rapid expansion and changes in food aid flows to Sub-Saharan Africa up to mid-1985. Trends for Sub-Saharan Africa as a whole and for the more seriously affected countries are examined, as are the comparative experiences of food aid of individual countries in the region. Table 11 lists the Sub-Saharan African countries and indicates the most seriously affected food-short countries, as defined by the WFP/FAO task force. It should be borne in mind that some practical problems exist in compiling data on food aid. These include lack of availability of reliable data, especially of most recent data; lack of common terminology and definitions; and different accounting systems. These data problems are sometimes a source of confusion. However, the basic facts are clear: food aid gradually emerged during the early 1980s as a resource too often of considerable significance to many countries of Sub-Saharan Africa. These trends were only accelerated with the crisis of 1984-1985. These facts provide a point of reference for further analysis of the sources of the crisis, its actual dimensions and consequences.     

Climate hazards: Lessons from recent events in the United States

Three recent cases of climate extremes are studied to identify human impacts and response strategies and to identify common characteristics that may help illuminate the nature of climate hazards. The 1980 heat wave in the central United States, 1981 cold wave in Boston, Massachusetts, and recent flooding and lake level rise in northern Utah, illustrate several important aspects of climate hazards that separate them from the more traditional set of catastrophic events (e.g. tornadoes, hurricanes and earthquakes) usually dealt with by hazards research and management. Among those characteristics are an emphasis on health impacts rather than physical damage, accumulative effects rather than short shocks, a tendency for impacts to accrue to certain socio-economic classes, and relatively slow onset. The management and research implications of these hazard characteristics are explored.     

Discrete event simulation to aid decision-making and mitigation in solid waste management

This article aims to evaluate municipal solid waste (MSW) management schemes in order to promote sustainability and eco-efficiency, core elements in global mitigation strategies in both public and private policies. A discrete event simulation (DES) approach was used to integrate the economic, environmental, and social aspects related to aseptic carton packages (ACP) in Itajuba, Brazil. The simulated scenarios consider three alternatives for disposing ACP: landfills, recycling, and incineration with energy recovery. According to our findings, incineration alternatives are preferred from an eco-efficiency perspective, given the potential greenhouse gas (GHG) emissions reductions and due to the possibility of energy recover, which reinforces the contribution of this technology to promote sustainability as largely found in the international literature. Given the context of MSW management in Brazil, this represents a significant opportunity to increase the effectiveness of mitigation strategies adopted in the country. Taking into account that this is by far the least applied technology, the authors strongly advocate that global strategies for mitigation consider different approaches to integrate carbon dioxide (CO₂) emission reductions related to the entire MSW management system and its alternatives, thus advancing from a waste disposal-oriented system to a life cycle–oriented system.

     

Direct capture of carbon dioxide from air via lime-based sorbents

Mitigation and Adaptation Strategies for Global Change - Direct air capture (DAC) is a developing technology for removing carbon dioxide (CO2) from the atmosphere or from low-CO2-containing...     

Simulation of a 100-MW solar-powered thermo-chemical air separation system combined with an oxy-fuel power plant for bio-energy with carbon capture and storage (BECCS)

The combination of concentrated solar power–chemical looping air separation (CSP-CLAS) with an oxy-fuel combustion process for carbon dioxide (CO₂) capture is a novel system to generate electricity from solar power and biomass while being able to store solar power efficiently. In this study, the computer program Advanced System for Process Engineering Plus (ASPEN Plus) was used to develop models to assess the process performance of such a process with manganese (Mn)-based oxygen carriers on alumina (Al₂O₃) support for a location in the region of Seville in Spain, using real solar beam irradiance and electricity demand data. It was shown that the utilisation of olive tree prunings (Olea europaea) as the fuel—an agricultural residue produced locally—results in negative CO₂ emissions (a net removal of CO₂ from the atmosphere). Furthermore, it was found that the process with an annual average electricity output of 18 MW would utilise 2.43% of Andalusia’s olive tree prunings, thereby capturing 260.5 k-tonnes of CO₂, annually. Drawbacks of the system are its relatively high complexity, a significant energy penalty in the CLAS process associated with the steam requirements for the loop-seal fluidisation, and the gas storage requirements. Nevertheless, the utilisation of agricultural residues is highly promising, and given the large quantities produced globally (~?4 billion tonnes/year), it is suggested that other novel processes tailored to these fuels should be investigated, under consideration of a future price on CO₂ emissions, integration potential with a likely electricity grid system, and based on the local conditions and real data.